Sandbox
A Windows Notebook PC with Ecogate greenBOX® 12 Setup & Monitoring software should be used for the initial setup of the greenBOX® 12. It will not only make setup and monitoring much easier but will also ​provide us with remote access, which allows us to better support you remotely and in a timely manner.
A Windows Notebook PC with Ecogate greenBOX® 12 Setup & Monitoring software should be used for the initial setup of the greenBOX® 12. It will not only make setup and monitoring much easier but will also ​provide us with remote access, which allows us to better support you remotely and in a timely manner.
(up to 225 gates) Enterprise-grade controller. 9 Modbus ports, quad redundant power (2+2), 12 I/O channels, 15.6" 4K OLED display. Maximum capacity for the largest multi-collector facilities.
(up to 225 gates) Enterprise-grade controller. 9 Modbus ports, quad redundant power (2+2), 12 I/O channels, 15.6" 4K OLED display. Maximum capacity for the largest multi-collector facilities.
The Ecogate Master Cable connects Ecogate Smart Gates and Power Master VFDs in daisy-chain to the greenBOX Nxt and greenBOX Master control units. Individual wires are color-coded to match the Ecogate documentation for easy installation. This cable provides a 24V DC power supply for gates and Modbus communication via shielded, twisted pairs. It can also be used to connect the Power Master VFD to the greenBOX 12 control unit. With 600V RMS insulation for safety.
The Ecogate Master Cable connects Ecogate Smart Gates and Power Master VFDs in daisy-chain to the greenBOX Nxt and greenBOX Master control units. Individual wires are color-coded to match the Ecogate documentation for easy installation. This cable provides a 24V DC power supply for gates and Modbus communication via shielded, twisted pairs. It can also be used to connect the Power Master VFD to the greenBOX 12 control unit. With 600V RMS insulation for safety.
The Power Master VFD (Variable Frequency Drive) is the best way to adjust the speed of the fan. It is prewired, with Ecogate software pre-installed for fast and easy setup. It can be used as part of the Ecogate system (greenBOX-controlled) or as a standalone VFD. The Power Master VFDs are avialable for 3-phase 230, 460, and 575 V AC. Three phase disconnect and fuses are built-in to simplify installation. The Power Master is UL Listed out of factory.
The Power Master VFD (Variable Frequency Drive) is the best way to adjust the speed of the fan. It is prewired, with Ecogate software pre-installed for fast and easy setup. It can be used as part of the Ecogate system (greenBOX-controlled) or as a standalone VFD. The Power Master VFDs are avialable for 3-phase 230, 460, and 575 V AC. Three phase disconnect and fuses are built-in to simplify installation. The Power Master is UL Listed out of factory.
The AAVS is a high-accuracy airflow measurement sensor designed for Ecogate systems using the greenBOX (Adelie-generation). It continuously measures air velocity in the main duct by sampling across the duct cross-section and averaging the results, delivering reliable real-time airflow and velocity data directly to the control system. This data improves system regulation, simplifies recalibration after system changes, and supports compliance with minimum conveying velocity requirements.
The AAVS is a high-accuracy airflow measurement sensor designed for Ecogate systems using the greenBOX (Adelie-generation). It continuously measures air velocity in the main duct by sampling across the duct cross-section and averaging the results, delivering reliable real-time airflow and velocity data directly to the control system. This data improves system regulation, simplifies recalibration after system changes, and supports compliance with minimum conveying velocity requirements.
The Ecogate Dust Collector Controller gives each dust collector its own intelligent interface, and full monitoring & control of all dust collector motors via VFDs.
The Ecogate Dust Collector Controller gives each dust collector its own intelligent interface, and full monitoring & control of all dust collector motors via VFDs.
(up to 150 gates) Large facility controller with a 15.6" 4K OLED touchscreen, 6 Modbus ports, dual redundant power, and 8 I/O channels. For operations that have outgrown the Nxt or require mission-critical redundancy.
(up to 150 gates) Large facility controller with a 15.6" 4K OLED touchscreen, 6 Modbus ports, dual redundant power, and 8 I/O channels. For operations that have outgrown the Nxt or require mission-critical redundancy.
If your workstation is using 460V or 600V AC, the AC Volt sensor is a good option. The AC VOLT sensor works from 120V AC. Please note that our Volt Sensor is not compatible with DC voltage, but it can be easily connected to a higher AC voltage of up to 600V. The input is connected in parallel to the cutting tool motor of the workstation and can accept voltage ranging from 110 to 690 V AC, providing accurate monitoring. The output is easily connected to the gate using the Ecogate Sensor Cable.
If your workstation is using 460V or 600V AC, the AC Volt sensor is a good option. The AC VOLT sensor works from 120V AC. Please note that our Volt Sensor is not compatible with DC voltage, but it can be easily connected to a higher AC voltage of up to 600V. The input is connected in parallel to the cutting tool motor of the workstation and can accept voltage ranging from 110 to 690 V AC, providing accurate monitoring. The output is easily connected to the gate using the Ecogate Sensor Cable.
Collects detailed status from the dust collector (fan pressure, filters, airflow). Provides alarms, dashboards, and remote visibility via the greenBOX®. Ships with Modbus Master included – ready to upgrade with VFDs later. Air Quality Sensor provides Air Quality Index, temperature, humidity, & atmospheric pressure (optional dust sensor can be installed externally)
Collects detailed status from the dust collector (fan pressure, filters, airflow). Provides alarms, dashboards, and remote visibility via the greenBOX®. Ships with Modbus Master included – ready to upgrade with VFDs later. Air Quality Sensor provides Air Quality Index, temperature, humidity, & atmospheric pressure (optional dust sensor can be installed externally)
The Ecogate Pressure Tap is designed for accurate measurement of static pressure within industrial ventilation duct systems, such as those used for dust and fume collection. It can be installed typically at the fan inlet or outlet, but can be used also at other locations.
The Ecogate Pressure Tap is designed for accurate measurement of static pressure within industrial ventilation duct systems, such as those used for dust and fume collection. It can be installed typically at the fan inlet or outlet, but can be used also at other locations.
Monitors fan and fan motor vibration levels for preventive maintenance. Detects early signs of mechanical wear before failure occurs. Optional add-on — data visible through the greenBOX dashboard.
Monitors fan and fan motor vibration levels for preventive maintenance. Detects early signs of mechanical wear before failure occurs. Optional add-on — data visible through the greenBOX dashboard.
While our timer can be used on its own, it is typically used in conjunction with a volt or current sensor for maximum efficiency. Ideal for cleaning workstations after a shift, this timer can be set for up to 60 minutes, providing reliable and precise control.
While our timer can be used on its own, it is typically used in conjunction with a volt or current sensor for maximum efficiency. Ideal for cleaning workstations after a shift, this timer can be set for up to 60 minutes, providing reliable and precise control.
Our Current Sensor is a versatile solution that can be used on simple tools like a chop saw or on industrial machines equipped with a VFD. One of the primary advantages of this sensor is that it does not need to be connected to the workstation; it only requires a phase wire to the motor through the sensor opening, making it simple and efficient to install. The sensor sensitivity can be adjusted for a current of 0.5 - 175 A, making it suitable for motors ranging from 0.5 HP and up.
Our Current Sensor is a versatile solution that can be used on simple tools like a chop saw or on industrial machines equipped with a VFD. One of the primary advantages of this sensor is that it does not need to be connected to the workstation; it only requires a phase wire to the motor through the sensor opening, making it simple and efficient to install. The sensor sensitivity can be adjusted for a current of 0.5 - 175 A, making it suitable for motors ranging from 0.5 HP and up.
Mirroring the capabilities of its CLASS 2 counterpart, this sensor detects both operator movement and product presence within a 2.5 to 196-inch range. The key distinction of the CLASS 1 laser sensor lies in its invisible laser, unlike the visible beam of CLASS 2 sensors. This feature makes it particularly suitable for school environments, prioritizing safety without compromising detection accuracy.
Mirroring the capabilities of its CLASS 2 counterpart, this sensor detects both operator movement and product presence within a 2.5 to 196-inch range. The key distinction of the CLASS 1 laser sensor lies in its invisible laser, unlike the visible beam of CLASS 2 sensors. This feature makes it particularly suitable for school environments, prioritizing safety without compromising detection accuracy.
Our versatile Volt Sensor is designed to work with both AC or DC voltage ranging from 24 to 230 V AC, making it ideal for a variety of industrial applications. The output is easily connected to the Ecogate gate using the Ecogate Sensor cable, while the input can be connected in parallel to the cutting tool motor of the workstation or to any circuit that is energized when the cutting tool is running, such as a switch, contractor, or PLC output.
Our versatile Volt Sensor is designed to work with both AC or DC voltage ranging from 24 to 230 V AC, making it ideal for a variety of industrial applications. The output is easily connected to the Ecogate gate using the Ecogate Sensor cable, while the input can be connected in parallel to the cutting tool motor of the workstation or to any circuit that is energized when the cutting tool is running, such as a switch, contractor, or PLC output.
(up to 75 gates) The most popular greenBOX. Built-in 10.1" touchscreen, 3 Modbus ports, full Smart System features. Handles the majority of Ecogate installations — single or multi-system. The everyday workhorse.
(up to 75 gates) The most popular greenBOX. Built-in 10.1" touchscreen, 3 Modbus ports, full Smart System features. Handles the majority of Ecogate installations — single or multi-system. The everyday workhorse.
Ecogate gates have standard flanged ends built on and therefore are compatible with standard flange rings. This makes installation of gates to the duct system easier. (Flanges come in pairs).
Ecogate gates have standard flanged ends built on and therefore are compatible with standard flange rings. This makes installation of gates to the duct system easier. (Flanges come in pairs).
Smart Motor factory-configured for independent operation — no greenBOX required. Opens on sensor activation, closes when machine goes idle. Relay contact available to trigger a dust collector automatically.
Smart Motor factory-configured for independent operation — no greenBOX required. Opens on sensor activation, closes when machine goes idle. Relay contact available to trigger a dust collector automatically.
Open/close gate automation via limit switches. No processor, no airflow measurement, no Modbus. Star wiring. Compatible with greenBOX 12 only. Best for small shops needing basic, cost-effective automation.
Open/close gate automation via limit switches. No processor, no airflow measurement, no Modbus. Star wiring. Compatible with greenBOX 12 only. Best for small shops needing basic, cost-effective automation.
Designed to work with Ecogate Smart Systems, which use smart control units such as the greenBOX Nxt and greenBOX Master, Smart Actuators are equipped with magnetic limit switches and an embedded processor with Modbus communication. They enable the reading of pressure, air velocity, and air volume at the gate, though calibration is required for air velocity and volume readings. Compatible with both rotating blade and butterfly-style gates
Designed to work with Ecogate Smart Systems, which use smart control units such as the greenBOX Nxt and greenBOX Master, Smart Actuators are equipped with magnetic limit switches and an embedded processor with Modbus communication. They enable the reading of pressure, air velocity, and air volume at the gate, though calibration is required for air velocity and volume readings. Compatible with both rotating blade and butterfly-style gates
Connects Ecogate angle-flange gates to Nordfab Quick-Fit clamp-together duct systems. Available sizes 4"–24". Manufactured by Nordfab.
Connects Ecogate angle-flange gates to Nordfab Quick-Fit clamp-together duct systems. Available sizes 4"–24". Manufactured by Nordfab.
Open/close blade design. Available 4"–26" in zinc-plated or stainless steel. Handles high dust loads and large particulates. Requires horizontal mounting with motor on top and 3-duct-diameter clearance from elbows and branches.
Open/close blade design. Available 4"–26" in zinc-plated or stainless steel. Handles high dust loads and large particulates. Requires horizontal mounting with motor on top and 3-duct-diameter clearance from elbows and branches.
Dual-blade design with silicone seal for airtight closure. Available 2"–40". More flexible installation than rotating blade — no 3-duct-diameter rule. Best for pharma, labs, fume, and low-particulate applications.
Dual-blade design with silicone seal for airtight closure. Available 2"–40". More flexible installation than rotating blade — no 3-duct-diameter rule. Best for pharma, labs, fume, and low-particulate applications.
The Ecogate Sensor Cable connects the Ecogate volt and current sensors at workstations to the Ecogate Standard/Smart Gates. As these sensors are installed within the workstation's electrical cabinet, the voltage can reach up to 480V, and 600 V AC in Canada. To ensure safety, the Sensor Cable is equipped with 600V RMS insulation.
The Ecogate Sensor Cable connects the Ecogate volt and current sensors at workstations to the Ecogate Standard/Smart Gates. As these sensors are installed within the workstation's electrical cabinet, the voltage can reach up to 480V, and 600 V AC in Canada. To ensure safety, the Sensor Cable is equipped with 600V RMS insulation.
Ecogate's Standard Cable makes connecting Ecogate Standard Gates to the greenBOX 12 control unit simple and hassle-free. With color-coded wires that match the Ecogate documentation, installation is made easy and straightforward.
Ecogate's Standard Cable makes connecting Ecogate Standard Gates to the greenBOX 12 control unit simple and hassle-free. With color-coded wires that match the Ecogate documentation, installation is made easy and straightforward.
(up to 36 gates) Entry-level Smart System controller. No built-in screen — access via browser or HDMI monitor. Same software platform, OTA updates, and Smart Gate compatibility as larger models. Ideal for small-to-mid facilities.
(up to 36 gates) Entry-level Smart System controller. No built-in screen — access via browser or HDMI monitor. Same software platform, OTA updates, and Smart Gate compatibility as larger models. Ideal for small-to-mid facilities.
(up to 12 gates) The original. Legendary durability — some units running 20+ years. Simple, reliable, no-frills automation for small shops. No cloud analytics or web interface. Configured via Windows PC.
(up to 12 gates) The original. Legendary durability — some units running 20+ years. Simple, reliable, no-frills automation for small shops. No cloud analytics or web interface. Configured via Windows PC.
Ensure proper installation and support, for Ecogate Gates. The tester measures motor current during gate opening and closing. By comparing the measured current with the recommended values shown on the tester, installers can confirm whether the gate is adequately supported. If the current is lower than expected, the support is sufficient.
Ensure proper installation and support, for Ecogate Gates. The tester measures motor current during gate opening and closing. By comparing the measured current with the recommended values shown on the tester, installers can confirm whether the gate is adequately supported. If the current is lower than expected, the support is sufficient.
A traffic light for easy monitoring of your system's performance - includes a built-in buzzer.
A traffic light for easy monitoring of your system's performance - includes a built-in buzzer.
Wall switch controls allow staff to independently start or stop dust collection for specific arms.
Wall switch controls allow staff to independently start or stop dust collection for specific arms.
Smart Motor capabilities plus proportional blade positioning — adjustable in 1% increments from fully closed to fully open. Used for bleed gates, pressure/velocity-controlled applications, and 3rd-party PLC integration.
Smart Motor capabilities plus proportional blade positioning — adjustable in 1% increments from fully closed to fully open. Used for bleed gates, pressure/velocity-controlled applications, and 3rd-party PLC integration.
The Keyence Laser Sensor, with a detection range programmable anywhere from 2.5-196 inches with separately adjustable minimum and maximum distance. This versatility makes it ideal for use with CNCs, edgebanders, welding booths, wide belt sanders, sanding tables, and polishers. It excels in detecting both material presence at the workstation and operator movement. The CLASS 2 laser emits a visible beam, an advantage in industrial settings for easily verifying sensor alignment and functionality.
The Keyence Laser Sensor, with a detection range programmable anywhere from 2.5-196 inches with separately adjustable minimum and maximum distance. This versatility makes it ideal for use with CNCs, edgebanders, welding booths, wide belt sanders, sanding tables, and polishers. It excels in detecting both material presence at the workstation and operator movement. The CLASS 2 laser emits a visible beam, an advantage in industrial settings for easily verifying sensor alignment and functionality.
GATES 2"-40"
CABLE
ACCESORIES
Installation
greenBOX
DUST
COLLECTOR
Workstation Activity
Gate
Body
Gate Motor (Actuators)
SENSORS