Ecogate Pressure Tap per AMCA Standard
The Ecogate Pressure Tap is designed for accurate measurement of static pressure within industrial ventilation duct systems, such as those used for dust and fume collection. It can be installed typically at the fan inlet or outlet, but can be used also at other locations.
Product Specifications
-
Dimensions: 84 x 64 x 24 mm (~3.3 x 2.5 x 1 in.)
-
Weight: 110 g (~4 oz)
-
Material: Plastic pressure tap body with a stainless-steel cover
-
Installation and Connection
The pressure tap features an outlet designed to connect with Polyconn 95A UV-stabilized hose ⅜” OD (and 9/16” OD hose). The hose is secured to the tap using a plastic cable tie. The tap is mounted to the duct wall with four screws and is suitable for a duct wall thickness of 0.078 to 0.094 inches (1.98 to 2.38 mm). The ⅜” Polyconn hose connects directly to the pressure sensor inputs at the Ecogate Dust Collector Interface, which is typically mounted at the dust collector.
Compliance with AMCA Standard
In accordance with the Air Movement and Control Association (AMCA) standard, a pressure tap must not obstruct the airflow inside the duct or alter the pressure reading. To meet this requirement, the hole drilled in the duct wall must not exceed 0.125” (3.17 mm) in diameter and must have a smooth, burr-free edge. The Ecogate Pressure Tap is based on this standard for accurately in a wide range of dust static pressures and air velocities inside the duct system.
Recommended UV Stabilized hoses
Polyconn 95A UV Stabilized ⅜” OD hose (PCU-375F) or larger 9/16” OD hose (PCU-562F).